Tyrrell 020 By Kostinha
Jul 1, 2012 11:35:20 GMT 2
Post by kostinha on Jul 1, 2012 11:35:20 GMT 2
Hi all,
One more model, this time the Tyrrell 020 from Tamiya in 1/20th, it was a very simple build, I added some tubing and electric wires in the engine and also a few PE nuts and bolts to the model, it was painted with Tamiya Sprays and acrylics and also with Humbrol enamels.
The heat shield on the engine compartment was made from the silver foil that is usual in some cigarrete packs.
The decals are from Studio27, the original ones were too yellow and I had to buy a new sheet.
After decalling the model receive two coats of TS-13 clear to seal the decals and to achieve a glossy finish, I hope you like the pics:
[img src="![]()
i656.photobucket.com/albums/uu284/kostinha38/Tyrrell%20020/Tyrrell020DSC06887.jpg"]
[/img]
More models to come!!
Best regards.
Kostinha
One more model, this time the Tyrrell 020 from Tamiya in 1/20th, it was a very simple build, I added some tubing and electric wires in the engine and also a few PE nuts and bolts to the model, it was painted with Tamiya Sprays and acrylics and also with Humbrol enamels.
The heat shield on the engine compartment was made from the silver foil that is usual in some cigarrete packs.
The decals are from Studio27, the original ones were too yellow and I had to buy a new sheet.
After decalling the model receive two coats of TS-13 clear to seal the decals and to achieve a glossy finish, I hope you like the pics:
[img src="
[/img]More models to come!!
Best regards.
Kostinha
: 
absorbers, with metal wire but is personal point of view.
: 
